5.3.5Recovery Volume Options

If you have created a recovery set, you can configure more recovery set options following the descriptions in the section.

See section 5.3.2 Creating a Recovery set to create a recovery set before continue.

To configure a recovery set:

1.From the utility main menu, select 4. Recovery Volume Options and press <Enter>. The following screen appears.

Intel(R) Rapid Storage Technology - Option ROM - 10.1.0.1008

Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.

[ RECOVERY VOLUME OPTIONS ]

1.Enable Only Recovery Disk

2.Enable Only Master Disk

 

 

 

 

 

 

[ HELP ]

 

 

 

 

 

 

 

 

Enable Only Recovery Disk - enables recovery disk if available and

 

 

 

 

 

 

disables master disk.

 

 

 

 

 

 

 

 

 

Enable Only Master Disk - enables master disk if available and

 

 

 

 

 

 

disables recovery disk.

 

 

 

 

Actions will result in change from Continuous Update mode to On-Request.

 

 

 

 

[↑↓]-Select

[ESC]-Previous Menu

[ENTER]-Select

2.

 

Use the up/down arrow keys to select the option you want, and then press

 

<ENTER>. The SELECT RECOVERY VOLUME screen appears.

 

 

 

 

 

 

[ SELECT RECOVERY VOLUME ]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Name

Level

Capacity

Status

Bootable

 

 

 

 

Volume0

Recovery(Cont.) 149.0GB

Normal

Yes

 

 

 

 

 

 

 

Select a Recovery volume to do the operation.

 

 

 

 

 

 

 

 

 

 

 

 

 

[↑↓]-Up/Down [SPACE]-Selects [ENTER]-Done

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.

 

Use the up/down arrow keys to select a drive, and then press <Space>

 

to select. A small triangle marks the selected drive. Press <Enter> after

 

completing your selection and return to the utility main menu.

5-30

Chapter 5: RAID configuration