INSTALLATION .III Memory) (System

III. INSTALLATION

SIMM Memory Installation

1.The SIMM memory modules will fit in only one orientation as shown because the plastic safety tab on one end of the SIMM sockets requires the notched end of the SIMM memory modules.

1 2 3 4

Notched End

72 Pin SIMM Sockets

2.Press the memory module firmly into place starting from a 45-degree angle, making sure that all the contacts are aligned with the socket.

3.With your fingertips, rock the memory module into a vertical position so that it clicks into place. The plastic guides should go through the two mounting holes and the support clips should snap.

Clip

72 Pin DRAM in SIMM Socket

Plastic Safety Tab (This Side Only)

Mounting Hole

To release the memory module, push both support clips outward and rock the module out of the support clips.

20

ASUS TX97-LE User’s Manual