Asus VIA K8T800, VIA VT8237, K8V-F manual Auxilliary connector 4-pin AUX

PIN 1

K8V-F

K8V-F Floppy Disk Drive Connector

FLOPPY

NOTE: Orient the red markings on the floppy ribbon cable to PIN 1.

2.Auxilliary connector (4-pin AUX)

This connector allows you to receive stereo audio input from sound sources.

AUX (White)

Right Audio Channel Ground Left Audio Channel

K8V-F Internal Audio Connector

3.IDE connectors (40-1 pin PRI_IDE, SEC_IDE)

This connector supports the provided UltraATA133 IDE hard disk ribbon cable. Connect the cable’s blue connector to the primary (recommended) or secondary IDE connector, then connect the gray connector to the UltraATA133 slave device (hard disk drive) and the black connector to the UltraATA133 master device. It is recommended that you connect non-UltraATA133 devices to the secondary IDE connector.

PRI IDE	PIN 1	SECIDE
K8V-F

K8V-F IDE Connectors PIN 1

NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.

1-18