2.2Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VW161 Series LCD monitor is specially designed for VESA wall mount.
To detach the arm/stand:
1.Remove the arm cover.
2.Have the front of the monitor face down on a table.
3.Use a screwdriver to remove the three screws on the stand of the monitor as the below drawing shows.
4.Detach the arm from the monitor.
•We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
•Hold the stand of the monitor when you remove the screws.
screws
The VESA wall mount kit (75 mm x 75 mm) is purchased separately.
Chapter 2: Setup |
