Asus VW195XL, VW202XL Adjusting the monitor angles, Detaching the arm/base for Vesa wall mount

2.2Adjusting the monitor angles

•For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you.

•Hold the base to prevent the monitor from falling when you change its angle.

•You can tilt the monitor’s from -3º to 20º, swivel from left-to-right for 45º, and lift the monitor’s height for about 70mm.

-3º~20º

70mm

45º 45º

0º

2.3Detaching the arm/base (for VESA wall mount)

The detachable arm / base of the VW195xL/VW202xL/VW225xL Series LCD monitor is specially designed for VESA wall mount.

To detach the arm/base

1.Lower the monitor to its lowest height, and then insert the monitor height adjustment lock (Figure 1).

2.Have the front of the monitor face down on a table.

3.Remove the rubbers in the four screw holes (Figure 2).

4.Use a screwdriver to remove the two screws on the arm (Figure 2), then slide out the arm/base to detach it from the monitor (Figure 3).

2-2 Chapter 2: Setup