Aiwa XR-M1000 CD Digital OUT Optical Jack, Press VIDEO/AUX or MD, Play the connected equipment

	CD DIGITAL OUT
LINE OUT MD VIDEO/AUX	(OPTICAL)

dDX-NM1OOO e

SUPER SURROUND

WOOFER

Refer to the operating instructions of the connected equipment for details.

●The connecting cords are not supplied. Obtain the necessary connecting cords.

●Consult your local Aiwa dealer for optional equipment,

The MX-NMI 000 can input analog sound signals through these jacks.

Use a cable with RCA phono plugs to connect audio equipment (turntables, LD players, MD players, VCRs, TV, etc.).

Connect the red plug to VIDEO/AUX R jack, and the white plug

to VIDEO/AUX L jack.

When connecting a turntable

Use an Aiwa turntable equipped with a built-in equalizer amplifier.

It is recommended that this jack be used to connect an MD player. Use a cable with RCA phono plugs.

Connect the red plug to MD R jack of the MX-NM1OOO, and the white plug to MD L jack,

The MX-NMIOOO can output analog sound signals through these jacks.

Use a cable with RCA phono plugs to connect audio equipment with LINE IN (analog input) jacks,

Connect the red plug of a cable to LINE OUT R jack, and the white plug to LINE OUT L jack.

Do not connect any equipment to LINE OUT jacks and VIDEO/

AUX jacks simultaneously. Otherwise, noise is generated and malfunction occurs.

Connect optional surround speakers with 8 to 16 ohm impedance to SURROUND jacks of the MX-NM1OOO.

Connect optional powered sub woofers with built-in amplifier to SUPER WOOFER jacks of the MX-NM1OOO,

CD DIGITAL OUT (OPTICAL) JACK

The DX-NM1OOO can output CD digital sound signals through this jack. Use an optical cable to connect digital audio equipment (DAT deck, MD recorder, etc.).

Remove the dust cap ~ from CD DIGITAL OUT (OPTICAL) jack. Then, connect an optical cable plug to CD DIGITAL OUT (OPTICAL) jack.

When CD DIGITAL OUT (OPTICAL) jack is not being used Attach the supplied dust cap @.

POWER 1

V,A

To play equipment connected to VIDEO/AUX jacks or MD jacks proceed as follows.

1 Press VIDEO/AUX or MD.

To play the equi~ment connected to VI DEO/AUX, press VIDEO/AUX. “VIDEO”appears on the display.

To play the eauipment connected to MD, press MD. “MD” appears on the display,

2 Play the connected equipment.

To change a source name in the display

When VIDEO/AUX is pressed, “VIDEO”is displayed initially. It can be changed to “AUX”or ‘<TV.

With the power on, press POWER while pressing VIDEO/AUX.

Repeat the procedure to select one of the names.

To adjust the sound level of the external source

When the sound level of the external source is much higher or much lower than that of other function sources, adjust it as follows.

1Press VIDEO/AUX or MD and play the equipment.

2Press V or A so that the sound level becomes the same as that of the other function sources.

m

During recording, the sound level can not be adjusted.

30 ENGLISH