3 Chapter Software Reference
Chapter 3 - Software Reference
Status - IP Config
IP Config tab shows all the current host and WLAN Adapter information including host name, DNS servers, IP address, subnet mask and default gateway.
Button
IP Release - If you want to remove the current IP address, click this button to release the IP address from DHCP server.
IP Renew - If you want to obtain a new IP address from DHCP server, click this button to renew the IP address.
Ping - Click this button to open “Ping” tab which is used to ping the devices in your network.
NOTE: The IP Release and IP Renew buttons can only be used on the WLAN Adapter which gets IP address from DHCP server.
Status - Ping
Click the "Ping" button in
1.Type the IP address of the device you want to verify in the IP Address field.
2.Configure the ping session by assigning the ping packet size and
number of packet to send, and the timeout value (in milliseconds).
3.Click the “Ping” button.
During the ping session, the Ping button Changes into a Stop button. To cancel the ping session, click the “Stop” button.
The session field displays information on the verified connection including the roundtrip time (minimum, maximum, and average) and packets sent, received, and lost after a ping session.
Click the “Clear” button to clear the session field.
16 | ASUS WLAN Adapter |
