15Fill your DDNS account data in the DDNS Setting page of your router.
16 Click Finish.
Click Save & Restart.
17Now we are to verify whether DDNS is working. Click Start menu and select Run...
18Type in cmd and click OK to open the DOS console.
19Type ping wl520g.dyndns. org (your host name). If reply information is displayed, the DDNS is working correctly.
6)Setting up WDS
Wireless bridge, also known as Wireless Distribution System or WDS, allows connection to one or more access points. We now take an example to show how to setup WDS for two APs. In this example, AP1, with MAC address of 00:0E:A6: A1:3F:6E and IP address of 192.168.1.1, will operate in “Hybrid“ mode; AP2, with MAC address of 00:0E:A6:A1:3F:87 and IP address of 192.168.1.2, will also be set to “Hybrid“ mode, but it would not assign IP addresses to clients. Only one DHCP server in the WDS system is allowed, that is AP1 in this example.
| Access Point A | Access Point B |
SSID | WL520g | WL520g |
LAN IP Address | 192.168.1.1 | 192.168.1.2 |
Encryption | NONE | NONE |
Wireless Bridge | Hybrid Mode | Hybrid Mode |
MAC Address | 000ea6a13f6e | 000ea6a13f87 |
Allow Anonymous | NO | NO |
17