WL-520g Wireless Router User Manual

9Enable Connect to APs in Remote Bridge List to connect

to the other APs in your list.

If you want to allow anonymous user to login your network, you can select Yes in Allow anonymous field. In this example, we do not allow anonymous users.

10 Enter the MAC address of AP2, i.e. 000ea6a13f87.

Press Add button to add the MAC address to your list.

11Press Finish button.

12Press Save & Start botton. Then, we are to setup AP2.

13Enter the web-based configuration page on AP2. Repeat step 1-2 to setup the same SSID with AP1. Then select WAN & LAN page in IP Config folder.

14Set the LAN IP address of

AP2 to 192.168.1.2.

15Next, we are to disable the DHCP server function of AP2 since AP1 is the only DHCP server in the wireless LAN. Enter the DHCP Server page in IP Config folder.

16Choose No to disable DHCP Server and press Apply botton.

17Repeat step 5-10. Then enter the MAC address of AP1, i.e., 000ea6a13f6e. Repeat step 11-12. After reboot, WDS would work.

19