1First, we are to set up AP1. Choose Bridge in the Wireless folder.
2Set the SSID as WL520g and WEP Encryption as None. We suggest AP1 and AP2 using the same SSID.
3Select WAN & LAN in the IP Config folder.
4Confirm that the IP address of AP1 is 192.168.1.1.
5Enter the Bridge page again.
6Select Hybrid as AP mode. Thus, AP1 will be both AP and WDS. If you want to use wireless function only, please choose WDS Only.
7When you choose WDS or Hybrid mode, you will see a message demanding a fixed channel for WDS.
8Select a fixed channel for WDS. In this example, we set it as Channel 3.
18