2.Specify a network name or SSID (Service Set Identifier), which is a unique identifier attached to packets sent over WLAN.

3.Select a security level to enable encryption methods: Low (None)

Medium (WEP-64bits)

Medium (WEP-128 bits)

High (WPA-PSK)

4.Select WAN Connection Type from the drop-down list. You are required to enter the user name and password if you are using PPPoE, PPTP, or L2TP connection. Contact your Internet Service Provider (ISP) for the user name and password.

5.Click Apply to save the settings.

After setting the ASUS WL-330N3G in Router mode, you need to connect the WL-330N3G’s LAN port to an ADSL modem and connect your computer to WL-330N3G’s SSID via wireless connection.

For more details on setting up the advanced functions, refer to the section 4.3 Advanced Setting.

4.2.2Access Point (AP) mode

In the Access Point (AP) mode, you can connect the Ethernet port and your wireless devices into the same local area network (LAN).

Wireless computer

WL-330N3G

To configure the ASUS WL-330N3G in Access Point/AP mode:

1.Click the Access Point tab. The Access Point page appears.

4-6

Chapter 4: Configuration