3 Chapter
Option ROM Messages [Force BIOS]
This item allows you to set the display mode for Option ROM.
Configuration options: [Force BIOS] [Keep Current]
INT19 Trap Response [Immediate]
[Immediate] | Executes the trap for INT19 immediately. |
[Postponed] | Executes the trap during legacy boot. |
Above 4G Decoding [Disabled]
This item allows you to decode the
Configuration options: [Disabled] [Enabled]
Setup Mode [EZ Mode]
[Advanced Mode] | This item allows you to go to Advanced Mode of the BIOS after POST. |
[EZ Mode] | This item allows you to go to EZ Mode of the BIOS after POST. |
CSM (Compatibility Support Module)
This item allows you to configure the CSM (Compatibility Support Module) items to fully support the various VGA, bootable devices and
Launch CSM [Enabled]
[Auto] | The system automatically detects the bootable devices and the add- |
| on devices. |
[Enabled] | For better compatibility, enable the CSM to fully support the |
| driver |
[Disabled] | Disables the CSM to fully support the |
| or the Windows® UEFI mode. |
The following items appear only when you set the Launch CSM to [Enabled].
Boot Device Control [UEFI and Legacy OpROM]
This item allows you to select the type of devices that you want to boot.
Configuration options: [UEFI and Legacy OpROM] [Legacy OpROM only] [UEFI only]
Boot from Network Devices [Legacy OpROM first]
This item allows you to select the type of network devices that you want to launch.
Configuration options: [Legacy OpROM first] [UEFI driver first] [Ignore]
Boot from Storage Devices [Legacy OpROM first]
This item allows you to select the type of storage devices that you want to launch.
Configuration options: [Both, Legacy OpROM first] [Both, UEFI first] [Legacy OpROM first] [UEFI driver first] [Ignore]
Chapter 3: BIOS setup |