Deleting a RAID set

Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set.

To delete a RAID set:

1.From the utility main menu, select 2. Delete RAID Volume and press <Enter>. The following screen appears:

[DELETE VOLUME MENU]

Name

Level

Drives

Capacity

Status

Bootable

Volume0

RAID0 (Stripe)

2

298.0GB

Normal

Yes

[HELP]

Deleting a volume will reset the disks to non-RAID.

WARNING: ALL DISK DATA WILL BE DELETED. (This does not apply to Recovery volumes)

[↑↓]-Select [ESC]-Previous Menu [DEL]-Delete Volume

2.Use the up/down arrow key to select the RAID set you want to delete, and then press

<Delete>. The following warning message appears:

[DELETE VOLUME VERIFICATION]

ALL DATA IN THE VOLUME WILL BE LOST!

(This does not apply to Recovery volumes)

Are you sure you want to delete “Volume0”? (Y/N):

3.Press <Y> to delete the RAID set and return to the utility main menu, or press <N> to return to the DELETE VOLUME menu.

5 Chapter

5-6

Chapter 5: RAID configurations