2.5.1Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency. Select any of these preset overclocking configuration options:
[Auto] | Loads the optimal settings for the system. |
[Manual] | Allows you to individually set overclocking parameters. |
[X.M.P.] | If you install memory modules supporting the eXtreme Memory Profile |
| (X.M.P.) Technology, choose this item to set the profiles supported by your |
| memory modules for optimizing the system performance. |
| The following item appears only when you set the Ai Overclocking Tuner to [Manual]. |
CPU Strap [Auto]
Allows you to select a strap close to your target BCLK (base clock) or leave it at [Auto] for the BIOS to decide.
Configuration options: [Auto] [100MHz] [125MHz] [166MHz] [250MHz]
This item will appear only if the CPU supports BCLK increasing function.
PLL Selection [Auto]
Set this item to [SB PLL] when you want to overclock the system beyond 100 MHz DMI frequency. Set to [LC PLL] for less jittery system performance.
Configuration options: [Auto] [SB PLL] [LC PLL]
This item will appear only if the CPU supports phase
Filter PLL [Auto]
Allows you to select a BCLK (base clock) mode when running in a high or low BCLK. Configuration options: [Auto] [Low BCLK Mode] [High BCLK Mode]
BCLK/PEG Frequency [100.0]
Allows you to set the BCLK/PEG frequency to enhance the system performance. Use the <+> or
The following item appears only when you set the Ai Overclocking Tuner to [X.M.P.].
eXtreme Memory Profile
Allows you to select the X.M.P. mode supported by your memory module. Configuration options: [Profile #1] [Profile #2]
2.5.2ASUS MultiCore Enhancement [Enabled]
[Enabled] | Default set to [Enabled] for maximum performance under XMP/Manual/ |
| |
[Disabled] | Allows you to set to default core ratio settings. |
ASUS |