Post Delay Time [3 sec]

This item allows you to select a desired additional POST waiting time to easily enter the BIOS Setup. You can only execute the POST delay time during normal boot. The values range from 0 to 10 seconds.

This feature will only work when set under normal boot.

The following items appear only when you set the Boot Logo Display to [Disabled].

Post Report [5 sec]

This item allows you to select a desired POST report waiting time

Configuration options: [1 sec] - [2 sec] [Until Press ESC]

2.8.5Bootup NumLock State [On]

[On]

Set the power-on state of the NumLock to [On].

[Off]

Set the power-on state of the NumLock to [Off].

2.8.6Wait For ‘F1’ If Error [Enabled]

[Disabled]

Disables the function.

[Enabled]

The system waits for the <F1> key to be pressed when error occurs.

2.8.7Option ROM Messages [Force BIOS]

[Force BIOS]

The third-party ROM messages will be displayed during the boot sequence.

[Keep Current]

The third-party ROM messages will be displayed only if the third-party

 

manufacturer had set the add-on device to do so.

2.8.8Interrupt 19 Capture [Disabled]

Allows you to trap Interrupt 19 by the option ROMs.

Configuration options: [Disabled] [Enabled]

2.8.9Setup Mode [EZ Mode]

[Advanced Mode]

Allows you to go to Advanced Mode of the BIOS after POST.

[EZ Mode]

Allows you to go to EZ Mode of the BIOS after POST.

2.8.10CSM (Compatibility Support Module)

Allows you to configure the CSM (Compatibility Support Module) items to fully support the various VGA, bootable devices and add-on devices for better compatibility.

2-40

ASUS Z87-C