DirectKey (DRCT) [Enabled]
[Disabled] | Disables the DirectKey button. The system will only power on or off when |
| you press the DirectKey button. |
[Enabled] | Allows the system to power on and go to the BIOS Setup directly when you |
| press the Reset button. Connect the |
| buton cable to the onboard DRCT header. |
Boot Logo Display [Auto]
[Auto] | Sets the boot logo to display during POST. |
[Full Screen] | Sets the boot logo display in full screen during POST. |
[Disabled] | Disables the boot logo display during POST. |
The following item appears only when you set the Boot Logo Display to [Auto] and [Full Screen].
Post Delay Time [3 sec]
This item allows you to select a desired additional POST waiting time to easily enter the BIOS Setup. You can only execute the POST delay time during normal boot. The values range from 0 to 10 seconds.
This feature only works when set under normal boot.
The following items appear only when you set the Boot Logo Display to [Disabled].
Post Report [5 sec]
This item allows you to select a desired POST report waiting time.
Configuration options: [1 sec] - [10 sec] [Until Press ESC]
Bootup NumLock State [Enabled]
This item allows you to enable or disable
Wait For ‘F1’ If Error [Enabled]
This item allows your system to wait for the <F1> key to be pressed when error occurs. Configuration options: [Disabled] [Enabled]
Option ROM Messages [Enabled]
[Enabled] | The |
[Disabled] | Disables the ROM messages and displays only the ASUS logo during |
| POST. |
Interrupt 19 Capture [Disabled]
This item allows you to trap Interrupt 19 by the option ROMs.
Configuration options: [Disabled] [Enabled]
Chapter 3
ASUS |