Creating a RAID set

To create a RAID set:

1.From the utility main menu, select 1. Create RAID Volume and press <Enter>. The following screen appears:

Name: Volume 0

RAID Level: aaaaaaaaaaaaaaa

Disks: dssdsdsds

Strip Size:aaaaaaaaaaaaaaaa

Capacity:aaaaaaaaaaaaaa

Sync:aaaaaaaaaa

Create volume

[HELP]

Enter a unique volume name that has no special characters and is 16 characters or less.

2.Enter a name for the RAID set and press <Enter>.

3.When the RAID Level item is selected, press the up/down arrow key to select a RAID level to create, and then press <Enter>.

4.When the Disks item is selected, press <Enter> to select the hard disk drives you want to include in the RAID set. The SELECT DISKS screen appears:

[SELECT DISKS]

Port

Device Model

Serial #

Size

Status

0

ST3160812AS

9LS0HJA4

149.0GB

Non-RAID Disk

1

ST3160812AS

9LS0F4HL

149.0GB

Non-RAID Disk

2

ST3160812AS

3LS0JYL8

149.0GB

Non-RAID Disk

3

ST3160812AS

9LS0BJ5H

149.0GB

Non-RAID Disk

Select 2 to 6 to use in creating the volume.

[↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done

5 Chapter

5-4

Chapter 5: RAID configurations