13.Thunderbolt header (5-pin TB_HEADER)

This connector is for the add-on Thunderbolt I/O card that supports Intel’s Thunderbolt Technology, allowing you to connect up to six Thunderbolt-enabled devices and a

DisplayPort-enabled display in a daisy-chain configuration.

1 Chapter

The add-on Thunderbolt I/O card and Thunderbolt cables are purchased separately.

14.T_Sensor connector (2-pin T_SENSOR1)

This connector is for the thermistor cable that allows you to monitor the temperature of your motherboard’s critical components and connected devices.

The thermistor cable is purchased separately.

1-42

Chapter 1: Product introduction