Allow Fan Stop 1/4 [Disabled]
These items allow the chassis fans to run at 0% duty cycle when the temperature of the source is dropped below the lower temperature.
Configuration options: [Disabled] [Enabled]
ASST 1 Fan
These items allow you to set the assistant fans’
Configuration options: [Disabled] [Enabled]
The following items appear only when you set the Assistant Fan
ASST 1 Fan
This item controls the assigned fan according to the selected temperature source. Configuration options: [CPU] [MB] [VCORE] [VCORE (BACK)] [DRAM] [PCH Core] [USB3.0]
If you select T_SENSOR 1/3, plug a thermistor cable to T_SENSOR 1/3 headers and stick the thermistor cable’s head to the desired component as the temperature source.
ASST 1 Fan Speed Low Limit [300 RPM]
This item allows you to disable or set the assistant fans’ warning speed.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
ASST 1 Fan Profile [Standard]
This item allows you to set the appropriate performance level of the assistant fans.
[Standard] Set to make the assistant fan adjust automatically depending on the chassis temperature.
[Silent] | Set to minimize the fan speed for quiet assistant fan operation. |
[Turbo] | Set to achieve maximum assistant fan speed. |
[Manual] | Set to assign detailed fan speed control parameters. |
The following items appear only when you set the ASST 1 FanProfile to [Manual].
ASST 1 Fan Upper Temperature [70]
Use the <+> or
ASST 1 Fan Max. Duty Cycle(%) [100]
Use the <+> or
ASST 1 Fan Lower Temperature [40]
Use the <+> or
Chapter 3
ASUS GRYPHON Z97 ARMOR EDITION |