Selecting an audio output
Realtek HD Audio Manager allows you to select the type of audio output depending on the output device that you are using.
To select an audio output:
1.Insert the audio device’s jack to the Line Out (lime) port. If the audio device’s jack is
already inserted to the corresponding port, click or tap | on the Realtek HD Audio |
Manager. |
|
2.On the
Next.
a.If you select Headphone, click or tap to select the type of headphone installed then click or tap OK.
b.If you select Front Speaker Out, click or tap to select the type of speaker installed then click or tap OK.
4 Chapter
Chapter 4: Software support |