TELEPHONE MEMORY
5When you finish entering the name,press 
or 
.
The screen displays 
.
6Enter the telephone number. Use 
to backspace and make
a correction. Press 
to store a pause in the dialing sequence.
Press 
to display the last number dialed from this phone.
7Press 
or 
to store your entry. The screen displays 
and the current setting.
8Press 
or 
to change the setting. Choose 
(for Yes) if you wish the phone to alert you to calls from this number by changing
to a distinctive ringing pattern after the first ring. Choose 
(for NO) for a normal ringing pattern.
9Press 
or 
to confirm your selection. If you chose 
in Step 8, a 
will be displayed with the directory entry.
Note: When memory is full the screen displays 
, an error tone sounds, and you will not be able to store a new number until you delete a stored number.
Edit a Number/Name Stored in Memory
1Press 
. The screen displays 
.
2Press the memory location key of the entry you wish to edit.
3When the screen displays the number you want to edit,press
. Then press 
or 
until 
flashes.
4Press 
. The screen displays the name and number. The flashing cursor appears at the end of the name. Use 
, 
and
the dial pad keys to edit the name. Press 
to move on to
edit the number. Press 
to move on to edit the Distinctive Ring setting.
5Press 
to save the edited information.
11
