AT&T 1450 user manual Handset Ringer Style/Battery Save, Temporary Tone Dialing, Headset Jack

1450_book_1ATT 3/26 3/26/02 4:59 PM Page 7

TELEPHONE OPERATION

AT THE HANDSET

Handset Ringer Style/Battery Save

You can select from four different handset ringer styles, or turn the ringer off and extend the battery life.

1Make sure the handset is off.

2Press G to enter programming mode.

3Press > until the screen displays RINGER:1 (the number is the current setting).

4Press S. The screen displays the current setting.

5Press < or > to select 1, 2, 3, 4, or OFF. You will hear a sample of each ring.

6Press S to choose the displayed ringer setting.

Temporary Tone Dialing

If you have dial pulse (rotary) service, you can change from dial pulse

to touch tone dialing during a call by pressing t. This is useful if you need to send touch tone signals for access to telephone banking or long-distance services.

1Dial the number.

2Press t. Buttons pressed after this send touch tone signals.

3After you hang up, the phone automatically returns to dial pulse (rotary) service.

Headset Jack

You can use this telephone hands-free when you install any industry standard 2.5 mm headset (purchased separately). For best results use an AT&T 2.5 mm headset

Plug the headset into the jack located on the right side of the handset (under the small rubber flap).

Do not force the connection, but make sure the plug

fits securely.

7