AT&T 1450 user manual Edit a Number/Name Stored in the Directory, Edit Dial Erase

1450_book_1ATT 3/26 3/26/02 4:59 PM Page 13

TELEPHONE DIRECTORY

4When you finish entering the name, press S or G. The screen displays ENTER NUMBER.

5Enter the telephone number. Use < to backspace and make

a correction. Press Pto store a pause in the dialing sequence.

—OR—

Press Pto display the last number dialed from this phone.

6Press S or G. The screen displays DISTINCT RING? and the current setting.

7Press < or > to change the setting. Choose Y (for Yes) if you wish the phone to alert you to calls from this number by changing to a distinctive ringing pattern after the first ring. Choose N (for NO) for a normal ringing pattern.

8Press S or G to confirm your selection. If you chose Y in Step 7, a D will be displayed with the directory entry.

Note: When memory is full the screen displays MEMORY FULL, an error tone sounds, and you will not be able to store a new number until you delete a stored number.

Edit a Number/Name Stored in the Directory

1Press > (DIR). The screen displays DIRECTORY.

2Press < or > to scroll alphabetically through entries stored in memory

—OR—

Press the dial pad key for the first letter of the entry you want to edit.

3When the screen displays the number you want to edit, press S. Then press < or > until EDIT flashes.

EDIT DIAL ERASE

973-555-0123

4Press S. The screen displays the name and number. The flashing cursor appears at the end of the name. Use <, > and the dial pad keys to edit the name. Press S to move on to edit the number. Press S to move to edit the Distinctive Ring setting.

5Press S to save the edited information.

13