Replacing the Handset Battery Pack | AT&T 1455 manual

BATTERIES

Replacing the Handset Battery Pack

1Remove the battery compartment cover on the handset by pressing on the indentation and sliding the cover downward.

2Lift out the old battery pack and disconnect.

3Align the two holes in the new battery pack’s plug with the socket pins, and snap the plug into place. Place the battery pack in the compartment with the wires in the lower left corner, along the bottom of the battery pack.

4Replace the cover by sliding it up into place.

5The new battery pack must be charged before using the phone. Place the handset in the base and allow it to charge for at least

12 hours the first charge. The telephone might operate before that, but for best performance, let the battery pack charge fully.

27

Image 30

AT&T 1455 user manual Replacing the Handset Battery Pack

Contents

Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents Before YOU Begin About Caller Identification Caller ID Installation Before You Install Table/Desk Installation Charge the handset battery Wall Installation Headline L-SUB Telephone Operation Page/Handset Locator Temporary Tone Dialing Handset Ringer Style/Battery SaveTelephone Operation Headset Jack Operating Range Display Screen Messages Telephone Memory Store a Number/Name in Memory Edit a Number/Name Stored in Memory Dial Edit Erase Delete a Number/Name Stored in Memory Dial a Memory Number Telephone Directory Store a Number/Name in the Directory Edit a Number/Name Stored in the Directory Delete a Number/Name Stored in the Directory Dial a Number from the Directory Caller ID Operation About Call HistoryReview Call History Delete a Specific Call Delete Records from Call HistoryDial a Displayed Number Delete All Calls Store a Call History Record in the Directory Distinctive RING?Y Set the Clock Audible IndicatorsHEADLINEATTHERBASE-SUB About Mailboxes AT the Base Record Your Announcement Answering System Feature Setup Feature Summary Listen to, Save & Delete Messages Adjust Playback VolumeAtheadlinethe BASEL-SUB Delete Messages Call Screening/Intercept Record a MemoMessage Window Display Connect with the Answering System Remote Access CommandsAT Touch Tone Phone Voice Menu AT Touchheadlinetone PHONER-SUB Turn system on Charge the Handset Battery Pack Batteries Replacing the Handset Battery Pack If the phone does not ring when you receive a call Case of DifficultyIf the phone doesn’t work at all, check these items first If you hear noise or interference when using the phone If you hear other calls while using your phoneIf you lose a call after changing channels If CL appears in the Message Window If messages are incompleteIf you have difficulty hearing messages If your outgoing announcement isn’t clear If callers cannot leave messages in Mailbox 2 or Remote Commands Answering System Press Machine off press #0 again