I N S T A L L A T I O N
1Connect the line cord.
Plug one end of the telephone line cord into the jack labeled TEL LINE on the back of the system. Plug the other end into a phone wall jack.
2Connect the telephone.
NOTE: If you do not want to connect a telephone, skip to Step 3.
Plug the line cord from the telephone into the jack labeled TEL SET on the back of the system.
3Connect the power cord.
Plug the power cord into the jack labeled 
POWER on the back of the system. Plug the power cord into an electrical outlet not controlled by a wall switch. Fit the power cord behind the strain relief tab. (When you connect the system to power, the Message Window flashes CL to indicate that you need to set the clock. See “Setting the Clock” in the OPERATION section of this manual.)
