REGISTER THE HANDSET
1Make sure to charge the handset battery pack at least 12 hours.
2At the 2462 corded base,press .
3Use or to select DISPLAY BASE-ID.
4Press .The base screen will display the 15-digit Base ID code
for about 30 seconds,then return to the idle screen. Write down the
Base ID code so you can enter it at the handset in STEP 6 below.
5At the cordless handset,use the softkey to select REGISTER.
6Enter the 15-digit Base ID code.
7Use the softkey to select OK. The screen displays PLEASE WAIT!!.
8After about 45 seconds,the screen displays FOUND BASE. If the
handset displays BASE BUSY TRY LATER,the base is in use.
For complete operation instructions,
refer to the manual that came with
your original handset.
OK
MENU
3
2402_map_2ATT 5/7/02 6:32 PM Page 3