AT&T 260 user manual Caller ID Operation, About Caller Identification

260book_1ATT 4/24 4/24/02 6:24 PM Page 20

CALLER ID OPERATION

	Time call was	Date call was
	received	received
Position of call in
call history
			Caller’s telephone
Indicates unreviewed
call information			number

Caller’s name

About Caller Identification

When the first call is received, the unit sets the current time and date automatically (you cannot set them), and resets them each time a new call comes in. The unit automatically adjusts for daylight savings time. When not in use the unit displays the current date/time, number of new calls received since the last review of memory, and number of reviewed calls in call history (up to 99).

For each call that comes in, the screen displays the following information between the first and second rings:

•Your caller’s name (15 letters are sent by your telephone company);

•The caller’s area code and telephone number (the area code is not displayed if it is programmed as the Home Area Code);

•The time and date of the call; and

•The position of the call in call history.

If you answer a call before the information appears on the screen, it will not be in the call history.

20