FEATURE MODULE 2 UPDATE
THIS PAGE UPDATES THE FOLLOWING
MERLIN™ CS
CUSTOMER DOCUMENTS:
ADMINISTRATION MANUAL: MODELS 1030 AND 3070 WITH FEATURE MODULE 2, ISSUE 1
USER'S GUIDE: MODELS 1030 AND 3070 WITH FEATURE
MODULE 2, ISSUE 1
ATTENDANT'S GUIDE: MODELS 1030 AND 3070 WITH FEATURE MODULE 2, ISSUE 1
SYSTEM ADMINISTRATORS: PLEASE READ THIS INFORMATION AND KEEP IT WITH YOUR ADMINISTRATION MANUAL FOR FUTURE REFERENCE
ASSIGNING DIAL ACCESS TO POOLS (Administration Manual page 28):
Some voice terminals in your system may be equipped with an Automatic Multipurpose Adapter, a Manual Multipurpose Adapter, or a General Purpose Adapter. These adapters allow you to connect to your MERLIN Communications System such external devices as computers, facsimile machines, and answering machines. If you wish to dial calls from these devices, and have Dial Access to Line Pools, you must first do one of two things. On the voice terminal with the adapter attached, you must assign either a personal line or one of your line pools to a particular button. This personal line or assigned pool should be the first entry in the Automatic Line Selection sequence.
SETTING UP ALLOWED LISTS (Administration Manual page 35):
Please disregard the shortcut described in the NOTE section. If you have a sequence of several new entries for the same list, it is necessary to dial #5 and the list number for each entry. If you have a printer connected to your system for SMDR, you can get a printout of each list. To do so:
●Touch Adm Misc
●Dial # 5
●Dial the list number
●Dial any number 0 through 9
●Dial # 900
COMCODE 845 660 133
