Priority Calling

To place a priority call

1

Press [ Priority ]

(3-burst ring)

 

or Dial Priority Calling code

 

 

 

 

 

[dial tone]

 

2

Dial the extension

 

 

Note: If your call is not answered and you wish to

 

 

redirect it to coverage, press [ Go to Cvr ] while call is

 

 

ringing.

 

 

 

 

 

To change a regular call

1

Press [ Priority ]

into a priority call (when

2

Wait for called party to answer

you hear a call waiting

 

 

 

 

ringback tone)

 

Note: If you still receive a call waiting

 

 

ringback tone, wait a few minutes and try again.

Reset Speakerphone

You can adjust the speakerphone to the surrounding room acoustics to provide optimal performance. Use the Reset Speakerphone feature in the following ways:

Whenever you move your voice terminal to another place (even in the same room)

Whenever the green light next to [ Speaker Reset Spkr ] is fluttering

Note: You may also use this feature when you are on a call in the unlikely event that your speakerphone makes a squealing noise during the call. When you press [ Select ] and [ Speaker Reset Spkr ] , your speakerphone will adjust itself to normal for that call. (No tones will be heard.)

Important: If there has been a interruption in power (such as, the system has just been powered up again, or you have plugged in the voice terminal at another location), the light next to [ Speaker Reset Spkr ] flutters until you reset the built-in speakerphone.

You can initiate the Reset Speakerphone feature when your handset is on-hook, or during a call in which you are using the built-in speakerphone. (If a call is in progress, you will not hear the tones, and the new speakerphone adjustment is reset for only the duration of that call.)

Remember that you can use the Reset Speakerphone feature only if your voice terminal is set for the Speakerphone feature (as opposed to the Speaker feature).

21

Page 25
Image 25
AT&T 7406 manual Priority Calling, Reset Speakerphone