How to Use the Features

The procedures that follow give short, step-by-step instructions for using each of the features. For your convenience, features are listed alphabetically.

Special Instructions

The first time you use these procedures, you will need to customize them for yourself by following the directions below. Your System Manager can supply the information required.

●To the right of each feature name is a box. For each feature that you have, mark a [ ✔ ] in the blank box as a reminder. (Voice features Conference, Drop, Hold, Message, Mute, the Select Button, Select Ring, Self-Test, and Transfer, and display feature Normal mode are already marked for you.) Ask your System Manager if your voice terminal is set for the Speaker (listen only) or the Speakerphone (speak and listen) feature, and then place a check in the box beside that feature also.

Note: If your voice terminal is set for the Speakerphone feature, you can also put a check in the box beside the Reset Speakerphone feature.

●To use a voice feature, you must have the handset off-hook unless you are instructed to remain on-hook in the procedures. You can activate and cancel most of the voice features by dialing 2- or 3-digit codes (if they are not already assigned to a button). In the blanks provided within the procedures, write in the feature code numbers.

As you operate the features on your voice terminal, keep in mind the following general rules.

●Follow carefully all the steps listed in the procedure for the particular feature you are using.

●Remember to press [ Select ] before attempting to use any of the bottom-labeled features on 2-level feature buttons.

●If you receive an intercept tone (high-pitched, alternating high and low tone) while attempting to operate any feature, you have taken too much time to complete a procedural step or have made a dialing error. Hang up, get dial tone, and begin again at Step 1.

●System 75 is available in more than one version. Some features, such as Abbreviated Dialing, Call Forwarding All Calls, Last Number Dialed, and Priority Calling operate slightly differently with Version 1, and possibly Version 2, than they do with later versions. If you are using Version 1 or 2 of the System 75 software, you should check the section titled Troubleshooting later in this guide before you use you use any of these 4 features.

8

Page 11 Page 13
Page 12
Image 12
AT&T 8434 manual How to Use the Features
Page 11 Page 13

8434 specifications

The AT&T 8434 is a highly versatile and robust device designed to meet the needs of modern communication. This sophisticated piece of technology combines various advanced features that facilitate seamless connectivity and efficient operation, making it ideal for both personal and professional use.

One of the most notable characteristics of the AT&T 8434 is its user-friendly interface. The device is designed for ease of use, ensuring that users can navigate its functions effortlessly. The intuitive layout of the menus and functions allows users to quickly access features such as call settings, messaging, and internet connectivity without any hurdles.

The AT&T 8434 is equipped with advanced voice technology, enabling crystal-clear communication. The device supports high-definition voice calling, enhancing the quality of conversations and providing a more natural sound. Additionally, it offers noise-canceling features that filter out unwanted background noise, ensuring that users can engage in conversations without distractions.

In terms of connectivity, the AT&T 8434 supports both wireless and wired options. Users can connect to the internet via Wi-Fi, allowing for high-speed browsing and streaming. The device also supports Bluetooth connectivity, enabling users to pair with other devices such as headphones and speakers, thus enhancing their communication and multimedia experiences.

Another key feature of the AT&T 8434 is its long battery life. The device is engineered to provide extended usage, making it suitable for users who require reliable performance throughout the day. Furthermore, it supports quick charging, allowing users to recharge the device quickly during short breaks.

The AT&T 8434 incorporates advanced security features to protect user data and privacy. It comes equipped with encryption protocols and secure login methods, ensuring that personal information remains safeguarded.

Lastly, the AT&T 8434 is compatible with various applications, allowing users to customize their experience based on individual needs. Whether for business or personal communication, the AT&T 8434 combines innovative technology with practical design, making it a valuable tool for enhancing connectivity and productivity.
Top Page Image Contents