Voice Features

Abbreviated Dialing (AD)

To program/reprogram
an AD button
Note: AD buttons must
first be assigned by your
System Manager.
1
2
3
4
On a separate sheet of paper, jot down the outside
numbers, extensions, and/or feature codes you want
to program
Note: Each AD button will hold one complete phone
number or feature code.
Pick up handset
[dial tone]
Note: If you are using the built-in speakerphone, you
must press a call appearance button, before you
proceed to Step 3.
Press [ Program ] (if this button has been assigned to
your voice terminal)
or Dial Program code
[dial tone]
Press [ AD xxxxx ] to be programmed
[dial tone]
5
6
7
Dial outside number, extension, or feature code you
want to program (up to 24 digits)
Note: If you are programming an outside number, be
sure to include a trunk code, if applicable.
Press [ # ] (on the dial pad) or [ AD xxxxx ] that you
To place a call using an Press selected [ AD xxxxx ] [ringback tone]
AD button Call is dialed (silently)
●
��
●
are programming
[confirmation tone], [dial tone]
Number is stored
Repeat Steps 4-6 to program additional buttons
Hang up to end programming
1
10