15) Message light
16) Volume control
button
17) Display control buttons
18) Call appearances/
feature buttons
Note: Your voice terminal can be set for either the
Speaker (listen-only) feature or the Speakerphone (listen
and talk) feature. Check with your System Manager to
see how your Speaker button is to be used.
A red light which goes on when a message has been left
for you.
For adjusting the volume of the speaker or the built-in
speakerphone when you are on a call, or for adjusting the
volume for the tone ringer when you are not using the
speakerphone.
Each of these 7 buttons accesses a display feature, such as
Inspect. Each button is labeled with a feature name.
At least 3 of these 12 buttons are devoted to incoming
and outgoing calls (call appearances) and are labeled with
an extension number; the remainder access features
(feature buttons) and are labeled with a feature name.
3