AT&T 850002593 user manual I N S T A L L A T I O N, Connect the telephone, Connect the power cord

I N S T A L L A T I O N

TEL LINE TEL SET

Strain

Relief Tab

Standard

Electrical

Outlet

Telephone

Set Cord

Modular

Telephone

Jack

Power Cord Telephone Line Cord

1Connect the telephone line cord. Plug one end of the telephone line cord into the jack labeled TEL LINE on the back of the system. Plug the other end into a modular telephone jack.

2Connect the telephone.

NOTE: If you do not want to connect a telephone, skip to Step 3.

Plug the telephone set cord from the telephone into the jack labeled TEL SET on the back of the system.

3Connect the power cord.

Plug the power cord into the jack labeled POWER and into an electrical outlet not controlled by a wall switch. Fit the power cord behind the strain relief tab. The Message Window flashes C to indicate that you need to set the clock.

Use only the power cord supplied with this product. If you need a replacement, call 1 800 222–3111. Input: 120V, 60 Hz.

Output: 9V AC, 400 mA.

1