AT&T E5965C Battery installation & charging, Did You Know? Did You Know?, Getting Started

91-5637-50-00_E5965C CIB_R0.qxd 6/23/2003 12:13 PM Page 7

Getting Started

Battery installation & charging

After installation, place the handset in the base and allow batteries to charge for 12 hours before use. You can keep batteries charged by returning the handset to the base after each use. When battery power is fully depleted, a full recharge takes about 8 hours.

Press coin into slot on base of handset to release latch, then remove battery cover.

1

LOW BATTERY

REDIAL 2:10 PM CID LOG

Low battery indicator

Return handset to base to recharge when this symbol flashes. (Handset will beep when battery is low.)

Insert supplied batteries.

Place handset in base to charge for 12 hours before first use.

To replace battery cover

Insert top tab first.

Press down to click in place.

Rotate antenna to fully upright position.

Caution: Use only the supplied NiMH battery (80-5461-00-00) or AT&T model 2AA NiMH replace- ment battery (SKU 26820). Do not use alkaline batteries.

DID YOU KNOW?

DID YOU KNOW?

Optional spare batteries can be kept charged in Optional spare batteries can be kept charged in the base, for quick replacement when handset the base, for quick replacement when handset batteries become depleted (see page 47). batteries become depleted (see page47

7