Charger installation
Install the charger as shown below.
. Plug the large end of the power adapter into an electrical outlet not controlled by a wall switch.
1. The small end of the power adapter has been already plugged into the jack on the bottom of the charger at the factory. Check to make sure it clicks firmly into place.
IMPORTANT INFORMATION
1.Use only the power adapter(s) supplied with this product. To order a replacement
power adapter, please call the appropriate number listed below based on your location: If you live in CT, please call 1 (800)
. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling,
