36
Answering system operation
1. SETUP
3. SETUP

-OR-

until desired feature
is heard (see list at
right).
until desired selection
is heard.
to set selection and
move to next menu
option.
to set selection and
exit menu.
2. SKIP or
REPEAT
PLAY/STOP
Changing feature options

You can change how the answering system oper-

ates. Press SETUP repeatedly to hear each feature.

When you hear the feature you want to modify

press SKIP or REPEAT to change the setting.

Press SETUP to set selection and move to next menu

option, or press PLAY/STOP to exit.

Feature options (default settings underlined).
System announces: Feature description:
Select a two-digit number (10-99) for
remote access from another telephone
(page 41).
NOTE: Press and hold SKIP or
REPEAT to increase or
decrease the remote access code
number by 10.
NOTES:
1. The message alert tone will
beep only if all the condi-
tions below are met:
Answering system is on
Message alert tone set-
ting is on
Have new messages
2. Press any telephone base
key (except HANDSET
LOCATOR) to temporarily
silence the message alert
tone. If you press and hold
DELETE you will delete
all old messages and the
message alert tone will be
temporarily silenced. The
message alert tone will be
re-activated with the next
incoming message.
"Message alert tone,"
current setting, then
"To change the setting
press SKIP or REPEAT;
to continue setup,
press SETUP." Options:
on/off
"Remote access code,"
current setting, then
"To change the setting
press SKIP or REPEAT;
to continue setup,
press SETUP."
Options: (select two-
digit code) 19
“Base ringer,” cur-
rent setting, then “To
change the setting
press SKIP or REPEAT;
to continue setup,
press SETUP.”
Options: high/low/off
"Number of rings,"
current setting, then
"To change the setting
press SKIP or REPEAT;
to continue setup,
press SETUP."
Options: 2/4/6/toll
saver
When on, the telephone beeps every
10 seconds when there are new mes-
sages.
Choose number of rings before the sys-
tem answers a call. When toll saver is
active, the system answers after two rings
if you have new messages, and after four
rings if you have no new messages. When
retrieving messages from a long distance
call, you may disconnect your call after
three rings so that there will be no long
distance charge incurred.
Choose telephone base ringer vol-
ume to high or low level, or turn the
telephone base ringer off.