9
Getting started
3. To attach the bracket for wall mounting,
insert the tabs of the bracket into slots
and on the telephone base, then press
the other bracket tabs into slots and as
shown on the right.
4. Plug the power adapter into an electrical
outlet not controlled by a wall switch. Plug
the telephone line cord into a telephone wall
jack. To mount the telephone on the wall,
position the mounting holes and over
the telephone outlet mounting studs. Press
and slide the bracket down firmly so the
telephone is held securely on the telephone
outlet mounting studs.
Telephone outlet mounting studs
Installation options

Tabletop mounting

To return the bracket from the wall mount to tabletop position, follow the

directions below.

1. Remove the telephone base from the wall.
Unplu g t he cords f rom the wal l jacks.
Remove the bracket from the telephone
base.
2. Insert the bracket tabs into slots
and on the telephone base,
then press the other bracket
tabs into slots and .
3. Route cords through slots. Plug the
other end of the telephone line cord
into a telephone wall jack. Plug the
large end of the larger power adapter
into an electrical outlet not controlled
by a wall switch.