FIGURE 1
FIGURE 2
FIGURE 3
■Adjusting the Clothing Clip
1An AT&T headset will best serve you when it is properly adjusted for comfort and clarity. Use the Clothing Clip to keep the headset properly seated, free from the weight of the cord.
2Attach the Clothing Clip to your clothing at a comfortable level. To adjust the clip position, squeeze the cord retainer and slide the cord through to provide sufficient slack so that the headset is not disturbed by head movements. (Refer to FIGURE 1)
■Positioning Mirage®
1Mirage has been designed to fit comfortably on either ear. Before placing Mirage on your ear, position the receiver away from your head. (Refer to FIGURE 2)
2Extend the voice tube approximately one inch.
3Hold the Mirage capsule above your ear and against your head, with the voice tube over your cheek and the cord behind your ear. Then, slide Mirage downward behind the top portion of your ear until positioned as shown. (Refer to FIGURE 3)
4Gently rotate the capsule back and forth until it rests securely and comfortably on your ear.
5Rotate the receiver and press it gently against the center of your outer ear. (Refer to FIGURE 3)
2
