FIGURE 7
FIGURE 8
FIGURE 9
FIGURE 10
■Placing and Receiving Calls with the Modular Amplifier
1For headset use, depress the middle button (labeled "ON/ OFF") so that the color indicator is visible. (Refer to FIGURE 7)
2To place a call, remove the telephone handset from its cradle. You should hear your dial tone. Dial normally. To end the call, hang up the handset.
3To receive a call, remove the handset from its cradle. You can now hear and be heard by the calling party. To end the call, hang up the handset.
4For handset use, depress the "ON/OFF" button again so that the color indicator does not appear. Pick up your handset as you would normally.
■Setting the Volume Control
To set the volume control to the hearing level most comfort- able for you, start with the wheel turned to number 1, the lowest level. To increase the volume, rotate the wheel to a higher number. (Refer to FIGURE 8 or 9, as appropriate)
■Using the Mute Button on the Modular Amplifier
1To mute your voice while still hearing the caller, depress the "MUTE" button so that the color indicator is visible. (Refer to FIGURE 10)
2To resume speaking to your caller, depress the "MUTE" button again so that the color indicator does not appear.
IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT YOUR AT&T REPRESENTATIVE.
4
PRINTED IN THE U.S.A. |
