AT&T CL82250, CL80100 Charge light is off or blinking, Common cure for electronic equipment

Appendix

Troubleshooting

The charge light is off or blinking.

•Make sure you plug the power and line cords in correctly and securely.

•Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.

•Clean the cordless handset and telephone base charging contacts each month with a pencil eraser or cloth.

•A blinking CHARGE light is an indication that the battery is not connected to the handset or missing completely. Ensure that the battery is installed properly.

Common cure for electronic equipment.

If the telephone does not seem to be responding normally, try putting the cordless handset in the charger. If it does not seem to respond, do the following (in the order listed):

•Disconnect the power to the telephone base.

•Disconnect the cordless handset battery, and spare battery, if applicable.

•Wait a few minutes.

•Connect power to the telephone base.

•Re-install the battery, and place the cordless handset into the charger.

•Wait for the cordless handset to re-establish its connection with the telephone base. Allow up to one minute for this to take place.

18