AT&T E2126, E1126 user manual Changing feature options, Feature options

14

1. SETUP

Press until desired feature is heard (see list at right).

2. CHANGE

Press until desired selection is heard.

3. SETUP

Press to set selection and move to next menu option.

Or

(PLAY/STOP)

Press to set selection and exit SETUP.

NOTE: Press and hold CHANGE to advance the remote access code number by 10.

Answering System Operation

Changing feature options

You can change how the answering system operates. Press SETUP repeatedly to hear each feature. Press CHANGE when you hear the feature you want to modify.

Feature options	(Default settings underlined).
System announces:	Feature description:
“Announcement. Press PLAY or	Press REC/MEMO to record your
press RECORD. To continue setup,	outgoing announcement (see page 30).
press SETUP.”	Press STOP to stop recording.
Options: [record announcement]
“Remote access code. To change	Enter a two-digit number (10-99) for remote
the setting press CHANGE.”
	access from another phone (see page 36).
Options: [enter 2-digit code] 19
“Message alert. To change the set-	When on, the telephone beeps every 10
ting press CHANGE.”
	seconds when you have new messages.
Options: On / Off
“Announcement only, record no	When on, callers hear an announcement
messages. To change the setting
	but cannot leave messages (see page 31).
press CHANGE.”
Options: On / Off
“Base ringer. To change the set-	Choose this option to turn the base
ting press CHANGE.”	ringer on or off (does not affect cordless
Options: On / Off	handset).
“Number of rings. To change the	Choose number of rings before the system
setting press CHANGE.”	answers a call. When Toll Saver is active,
Options: 2 / 4 / 6 /Toll Saver	the system answers after 2 rings if you
	have new messages, and after 4 rings if
	you have no new messages.

Disabling the message alert function temporarily

When the answering system is turned on (the ANSWER ON/OFF light is lit) and the message alert function is activated, any new incoming message will increase the flashing number in the message window by one, and a beep tone will sound every ten seconds as a reminder that there are unreviewed messages on the answering system.

To temporarily disable the message alert tone, press any key (except ANSWER ON/OFF and HANDSET LOCATOR keys) on the base. This turns off the audio message alert tone but the number in the message window will continue to flash as a reminder that there are unre- viewed messages on the answering system. The mes- sage alert tone will be re-activated with the next incom- ing message.

To switch off the message alert tone for all incoming messages, read the section on disabling the message alert function on this page above.

31