AT&T E1828B, E5828B Speed dialing (cordless handset only)

Telephone operation

Speed dialing (cordless handset only)

On the cordless handset, numbers called most fre-

quently can be stored in so that they can be dialed

with only two button presses.

You can enter nine speed dial numbers up to 24

digits. Each entry is associated with a dial pad

numeral key.

The nine speed dial numbers on the cordless

handset will be automatically added to the hand-

set directory. You can easily dial these telephone

numbers by pressing and holding a dial pad key

and then pressing PHONE/FLASH.

You can also make existing directory entries to

speed dial entries.

To create a speed dial entry

• Press MENU/CHAN to begin programming.

• Press CID/-VOLUME or DIR /VOLUME+ until

the screen displays

SPEED DIAL

• Press SELECT/TRANSFER.

• Press a number key on the dial pad to choose

a memory location (1-9).

• Enter a name (up to 15 characters), then press

SELECT/TRANSFER (see page 26 for instructions

on name entry).

• Enter a telephone number (up to 24 digits), then

press SELECT/TRANSFER.

• Choose distinctive ringing (yes or no) by press-

ing CID/-VOLUME or DIR /VOLUME+ (see

page 27 for information about distinctive ring).

• Press MENU/CHAN or SELECT/TRANSFER to store

the number. You will hear a confirmation tone.

NOTE: The speed dial fea-

ture occupies up to nine of the

thirty memory locations in the

directory. For example, if there

are only five speed dial entries,

then up to 25 entries can be

stored in the directory. If there

are already 30 entries in the

directory, no new directory and

speed dial entries can be stored

in memory until some of the

existing ones are deleted.

1. MENU/CHAN

2. DIR

3. SELECT/TRANSFER

(pages 24-25).

NOTE: You can convert any

directory entry into speed dial

entry (page 29).