AT&T E5902B, E5921 Belt clip & optional headset, Install belt clip as shown below if desired

Getting started

Belt clip & optional headset

Install belt clip as shown below if desired.

Snap belt clip into notches on both sides of handset.

To release belt clip, pull and unlock one flap from the notch first before detach- ing the whole belt clip from handset.

For hands-free telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To purchase a headset, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268.

Plug 2.5 mm headset into jack on side of handset (beneath small rubber flap).

TONE

MUTE REDIAL

DELETE PAUSE