Getting started
Wall mounting
The base can be installed on any standard wallphone outlet as shown below. Choose a location away from any electronic equipment, such as personal com- puters, computer routers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.
1)Connect telephone line cord and AC power cord to telephone jacks and wall jacks, as shown on page 8.
2)Install wall mount bracket onto set. First put the two front wall mount bracket tabs into the front notches 
on bottom of telephone base, then squeeze the rear tabs of the wall mount bracket as you insert them into the rear notches 
on the bottom of the telephone base.
NOTE: To disassemble the wall mount bracket, squeeze the rear notch- es 
while lifting up the wall mount bracket back and away from the tele- phone base.
3)Plug power adapter into electrical outlet.
4)Plug telephone line cord into an telephone cord wall jack.
5)Position the wall mount bracket
over the wall outlet mounting pegs,
and press and slide the wall mount
bracket down firmly so it is held securely on the outlet mounting pegs.
b | b |
a a
10
