AT&T EL51359, EL51209 user manual Multiple handset use, Handset locator, Join a call in progress

Multiple handset use

Multiple handset use

Handset locator

The handset locator feature is useful if you misplace any handsets.

To start the paging tone:

Press HANDSET LOCATOR at the telephone base to start the paging tone on all handsets for 60 seconds.

NOTE: If you press OFF/CLEAR or MUTE/DELETE on a handset, the ringer of the handset is silenced but the paging tone continues.

To stop the paging tone:

•Press PHONE/FLASH, SPEAKER, or any dial pad key (0-9, *, or #) on the handset(s),

-OR-

•Press HANDSET LOCATOR on the telephone base.

NOTE: The handset ringer volume also determines the level of the paging tone. If the handset ringer volume level is set to off, that handset is silent for all calls and paging (page 9).

++QBHJOH++

Join a call in progress

You can conference with another system handset while on a call. If a handset is already on a call and you would like to join the call, press PHONE/FLASH or SPEAKER on another system handset.

Press OFF/CLEAR or place the handset in the telephone base or charger to exit the call. The call ends when all handsets hang up.

NOTE: You can only use two system handsets at the same time on an outside call.

19