AT&T HS-8200 user manual Making a Call, Answering a Call, Ending a Call, Redial, Mute

T E L E P H O N E O P E R A T I O N

Headset jack	Allows you to
	hear caller,
	but caller can’t
Make, answer	hear you
or end a call	Access subscriber
Access numbers in	services
telephone memory	Redial last
	number called
Temporary Tone
Store numbers in	Turn Handset
telephone memory	Ringer off
Change channels	Adjust handset
	volume

Turn Handset Ringer on

Light goes on when handset is in use

Light goes on when handset is charging in base

Send paging tone to handset

Making a Call

1Press Pon the handset and wait for the PHONE light to go on steadily.

2When you hear a dial tone, dial the number.

Answering a Call

If the handset is in the base, lift the handset. The PHONE light goes on and the call is connected

— OR —

If the handset is away from the base, press Pon the handset. The PHONE light goes on steadily and the call is connected.

NOTE: Although ringing stops when you answer, you might not be able to hear the other party until the PHONE light goes on steadily.

Ending a Call

Press Pon the handset

— OR —

Place the handset in the cradle.

Redial

The last number dialed on this phone (up to 24 digits) is stored in redial memory until you dial another number.

1Press P.

2Wait for the dial tone and for the PHONE light to go on steadily.

3When you hear a dial tone, press R.

Mute

Mute allows you to hear your caller, but prevents the caller from hearing you.

1Press Mwhile on a call.

2To return your conversation, press Magain.

4