B A T T E R I E S

Charging the Handset Battery Pack

This battery should remain charged up to 15 days with the Ringer turned on and up to 30 days with the Ringer off. A fully charged battery provides an average talk time of about 10 hours.

The battery pack needs charging when:

•A new battery is installed in the handset.

•The phone beeps four times when you press P.

•The phone does not respond when you press P.

Place the handset in the base either in the face-down or face-up position so the CHARGING/HANDSET IN USE light turns on. The battery pack is typically fully charged in six hours.

You can keep the battery fully charged by returning the handset to the base after each use.

If you repeatedly get a low battery indicator, even after six hours of charging, the battery should be replaced.

CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully:

•Use only Replacement Battery 3300 (SKU# 90556).

•Do not dispose of the battery in a fire. The cell might explode. Check with local codes for special disposal instructions.

•Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

•Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm.

•Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

•Observe proper polarity orientation between the battery and battery charger.

Nickel Cadmium Rechargeable Batteries

must be recycled or disposed of properly. Do not dispose of in household garbage. If burned, it could explode. If punctured, it could release caustic material which could injure the skin or eyes. If swallowed, it may be toxic.

The RBRC™ seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle Nickel-Cadmium rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center. Or, you may call 1–800–8BATTERY for locations accepting spent Nickel-Cadmium batteries.

Replacing the Handset Battery Pack

1Remove the battery compartment cover on the handset by pressing on the indentation and sliding the cover downward.

2Lift out the old battery pack.

3Hold the new battery pack and plug the connector into the handset. Place the battery pack into the case.

4Replace the cover by sliding it on its track up over the battery case until it snaps firmly into place.

5The new battery pack must be charged before using the phone. Place the handset face up or face down in the base and allow it to charge for at least

12 hours the first charge (after that, the battery will quick-charge in only six hours). The telephone might operate before that, but for best performance, let the battery pack charge fully.

RBRC is a registered trademark of the Rechargeable Battery Recycling Corporation.

7

Page 7
Page 8
Image 8
AT&T HS-8200 user manual T T E R I E S, Charging the Handset Battery Pack, Replacing the Handset Battery Pack
Page 7

HS-8200 specifications

The AT&T HS-8200 is a versatile and innovative device that has made a significant impact in the realm of telecommunications. As a part of AT&T's expanding portfolio, the HS-8200 stands out with its compelling features and advanced technology, making it a popular choice among both consumers and businesses.

One of the most notable characteristics of the HS-8200 is its enhanced connectivity options. Designed to support various communication needs, it integrates multiple network protocols such as VoIP, LTE, and 5G, enabling seamless communication regardless of the network environment. This multi-connectivity feature ensures users can enjoy uninterrupted service, whether on the go or at a fixed location.

The HS-8200 also emphasizes user-friendliness with its intuitive interface. This device features a sleek design with a vibrant display that simplifies navigation and accessibility. Users can easily manage settings and preferences, making it suitable for individuals of all tech-savvy levels. The device supports voice-activated commands, enhancing the hands-free experience for users, which is particularly beneficial for busy professionals or individuals multitasking.

Security is another critical feature of the AT&T HS-8200. The device employs robust encryption methods to safeguard sensitive information transmitted over its networks. This level of security is essential in today's digital landscape, where data breaches and cyber threats are rampant. By prioritizing user security, AT&T demonstrates its commitment to providing a safe communication experience.

Furthermore, the HS-8200 incorporates smart technology, allowing it to adapt to network conditions automatically. This adaptability ensures optimal performance, reducing dropped calls and enhancing call quality. Users can expect clear audio and reduced latency, even in high-demand situations, making it an ideal choice for both personal and business use.

In terms of battery life, the HS-8200 is equipped with a powerful rechargeable battery that provides extended usage between charges. This ensures that users can rely on the device for long hours, whether for daily communication or during important business meetings.

Overall, the AT&T HS-8200 combines advanced connectivity, user-friendly design, robust security, smart technology, and impressive battery life to meet the diverse communication needs of modern users. Its competitive features position it as a leading choice for those seeking a reliable and efficient telecommunications device. By continuously innovating and expanding its offerings, AT&T remains a significant player in the telecommunications industry, and the HS-8200 exemplifies this commitment to excellence.
Top Page Image Contents