Programming System 25 Features, Considerations | AT&T specs

Programming System 25 Features

Although the cordless telephone has five (5) programmable buttons, it must be administered as a 10-button multiline telephone (set 303). This is because the cordless telephone supports the message waiting feature, but the 5-button telephone does not.

Considerations

■Since the cordless telephone does not have a speakerphone or display, and cannot be used as an attendant console, features that depend on those requirements are not available on the cordless phone.

■If Send All Calls is programmed, select Single Ring Reminder, because there is no visual indication when this feature is activated.

■The five programmable buttons on the cordless telephone correspond to buttons 7 through 11 on a regular 10-button telephone, as shown below.

Order of Appearance of Buttons

10

Image 13

AT&T manual Programming System 25 Features, Considerations, Order of Appearance of Buttons

Contents

AT&T System 25 Cordless Telephone To Order Copies of this Document Refer to Document Number Contents Introduction Base Unit Controls Cordless Telephone Controls Handset Controls Ringing Tones Lights Handset Tones Personal Dial Code PDC Data Dial Code DDCAdditional Information System 25 Features System 25 Cordless Telephone Features First to use Considerations Programming System 25 FeaturesOrder of Appearance of Buttons Press On/Off Procedures for Programming Features