Charger installation
1.Plug the small end of
the handset charger power adapter into the jack on the underside of the charger, then route the cord through the slot as shown.
2.Plug the handset charger power adapter into a power outlet not controlled by a wall switch.
IMPORTANT INFORMATION
1.Use only the power adapters supplied with this product or equivalent. To order a replacement power adapter, visit our website at www.telephones.att.com, or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
2.The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-
