Getting started
Belt clip & optional headset
To attach the belt clip:
Snap the belt clip into the retaining tabs on both sides of the handset as shown in the figure.
To remove the belt clip:
Gently lift either of the belt clip retaining tabs, shown in the figure, outwards to remove the belt clip from the handset.
For handsfree headset conversations, use any industry standard 2.5 mm headset (purchased separately). For best results, use an
AT&T 2.5 mm headset. To purchase a headset, visit our website at www.telephones.att.com or call 1 (800)
Lift the rubber flap here.
Plug a 2.5 mm headset into the jack on the side of the handset.
Side of handset.
11
